How Do You Wash a Grounding Sheet?

Machine wash with a liquid detergent, line dry or tumble on low heat, and never use fabric softener, bleach, whitening agents or dryer sheets. That last rule is the one that matters most: softeners and dryer sheets work by depositing a thin coating on fibre, and a coating on a conductive fibre sits between your skin and the thing it is meant to touch.

What exactly should I avoid?

• Fabric softener — coats the conductive fibre and reduces conductivity over time.
• Dryer sheets — same mechanism, applied in the dryer.
• Bleach and whitening agents (including oxygen or "Oxi" powders) — these attack the silver itself.
• High heat — keep tumble drying low.

What temperature and detergent?

Our own-stock products carry their own instructions, and they are not identical, so check the product page rather than applying one rule to everything. Two patterns exist across the range:

• The cotton bedding — for example the Natural Fitted Grounding Bed Sheets — is specified as machine wash every 1–2 weeks at 40 °C (105 °F) using liquid detergent only.
• The premium and high-silver products — for example the Liquid Silver™ Grounding Sheet — are specified as machine wash cold or gentle cycle with a mild detergent.

Liquid detergent is preferred over powder in both cases, because powder can leave undissolved residue in the weave.

What is the washing procedure, step by step?

1. Unsnap the cord from the sheet’s connector tab and set it aside before the sheet goes into the machine.
2. Wash the sheet on its own, or with other smooth bedding. Keep it away from towels, zips and hooks, which can snag the weave.
3. Use liquid detergent only — the cotton bedding is specified at 40 °C (105 °F), the premium and high-silver products cold or gentle with a mild detergent.
4. Add nothing else to the drum: no softener, no whitening agent, no bleach.
5. Line dry, or tumble on low. Snap the cord back on once the sheet is dry.

How often should I wash it?

Every one to two weeks for the cotton bedding, which is roughly ordinary bed-linen frequency. The reason the product pages give is about conductivity rather than laundry habit: body oils accumulate on the fabric, and an oily film is itself an insulating layer.

Why does lotion matter?

For the same reason. The cotton products specify waiting at least an hour after applying lotions or body oils before sleeping on the sheet, so the skin has absorbed them rather than transferring them onto the fabric.

How do I dry it?

Line drying is the first choice. If you tumble dry, keep it on low — the cotton bedding specifies no more than 65 °C (150 °F). Do not add a dryer sheet.

The silver has darkened — is that a fault?

No. Silver may show slight discolouration over time with use and washing. Our product pages state this explicitly as a natural property of the material rather than a defect, and it does not affect function. If you want to confirm the fabric is still connected, the Grounding Tester Pen checks continuity directly.

Still have a question? Read the FAQ